How to charge motorcycle battery

If you are having issues with charging the battery of your bike then do not worry. We will take you through the process on how to charge motorcycle battery and hopefully, you will be back to riding your bike fast. Charging a motorcycle battery is not difficult. All you need to do is to follow the instructions detailed below and you will be good to go.

Important things to know when learning how to charge Motorcycle Battery

Motorcycle batteries, like every other small battery, cannot withstand being discharged and left that way for a period of time. Sometimes, the batteries can be brought back to life but even when salvaged, the irremediable and permanent damage might be done by both the discharge and successive charging. Prepare to buy a new set of battery if this happens. First thing first, let us get your battery up first before deciding on whether you will need to buy a new battery or not.

how to charge motorcycle battery

Check out the kind of battery you have

This is the first step in how to charge a motorcycle battery. There are different kinds of battery models. Absorbed Glass Mat (AGM), Gel, and Lead Acid batteries can be charged in a regular way. However, Lithium based batteries such as Lithium Phosphate, Lith-iron, Lith-ion, etc. require special chargers.

Know the type of charger you need

The next step in how to charge motorcycle battery is to determine the kind of charger you need. There are different kinds of battery chargers. There is the trickle charger, float charger, and smart charger. Each of these has its own charging process. The trickle charger, for instance, needs close monitoring all through the charging process. The float charger on the other hand automatically switches on and off to keep the charging rate at optimal charge level. If you have this type of charger, you will hardly have an issue with battery discharge. The smart charger monitors the charging progress of the battery and charges at different rates so as to reduce the damage done to your battery.

Remove the Battery

Once you have your charger ready, take the bike outside or to a ventilated work area. The next step is to pull out the battery from the bike. It is dangerous to charge the battery while it is still in the bike. This is because the temperature of a battery alters when charging. There is a chemical reaction that takes place during the charging process which produces heat. Having the battery in the bike while charging, therefore, can cause irreparable damage to the bike

Charge the Battery

Attach the charger to the terminals and be sure they are fastened correctly. Make sure you attach the charger leads to the battery properly. Once you are certain it is correctly attached, plug in the charger. Stay close to the charging units to be able to monitor the process, at least for the first few minutes.

Fix the Battery

Once the battery is fully charged, unplug the charger. Fix the battery back to your bike and secure the hold downs. Next is to attach the positive cable and then, the negative. It is important that you do not mix the cables up. It has to be positive first before the negative.

We are sure that the steps on how to charge motorcycle battery itemized above will help get you back on the road with your bike, quickly and efficently.

Leave a Comment